We have a 100w Boss Laser LS-1630.
Forbidden Materials
Approved Materials
Material Settings
These settings were taken directly from Boss Laser.
Cut Settings
| Material | Power (%) | Speed (mm/s) | Interval (mm) | Thickness |
|---|---|---|---|---|
| Acrylic | 75 | 15 | N/A | 1/4" |
| Balsa Wood | 55 | 25 | N/A | 1/8" |
| Bass Wood | 55 | 25 | N/A | 1/8" |
| Birch Wood | 70 | 15 | N/A | 1/4" |
| Birch Plywood | 75 | 15 | N/A | 1/4" |
| Cardboard | 60 | 15 | N/A | 1/4" |
| Leather | 75 | 12 | N/A | 1/8" |
| Paper | 15 | 20 | N/A | 1/100" |
| Rubber | 75 | 12 | N/A | 1/8" |
| Foam | 55 | 25 | N/A | 1/4" |
Engrave Settings
| Material | Power (%) | Speed (mm/s) | Interval (mm) | Thickness |
|---|---|---|---|---|
| Acrylic | 20 | 350 | .065 | Any |
| Anodized Aluminum | 20 | 325 | .065 | Any |
| Balsa Wood | 20 | 350 | .065 | Any |
| Bass Wood | 25 | 350 | .065 | Any |
| Birch Wood | 25 | 350 | .065 | Any |
| Birch Plywood | 25 | 350 | .065 | Any |
| Cardboard | 20 | 350 | .065 | Any |
| Ceramic | 40 | 350 | .065 | Any |
| Glass | 25 | 325 | .065 | Any |
| Granite | 25 | 275 | .065 | Any |
| Leather | 18 | 350 | .065 | Any |
| Powder-coated Metal | 20 | 325 | .065 | Any |
| Mirror – Back-side | 20 | 325 | .065 | Any |
| Rowmark | 20 | 350 | .065 | Any |
| Rubber | 20 | 350 | .065 | Any |